This post may contain affiliate links or mention our own products, please check out our disclosure policy.

RV TV Mount Installation Ideas and Resources

This post was updated on March 15th, 2024

3. Overhead Plywood Mount with Pull Down Function

Much like the above  and below mentions of plywood mounts, the pull down mount can be installed in the same fashion. Though this mount type is rare because of its expense ($200+) yet it offers a lot of flexibility. It can be installed in the same manner as the articulating arm but offers a height adjustment up to 20″ depending on the model. That means you can change the line of sight on your TV to something closer to what you would have at your sticks and bricks home and not have to look up at the ceiling.  Picture below shows you the flexibility. Link to it Here

Pull Down mount

[asa]B001LL5JDA[/asa]

Sign up for the newsletter today!

Please enter a valid email address.

An error occurred. Please try again later.

× logo

Thank you for subscribing to the Do It Yourself RV newsletter, keep your eye on your inbox for updates.

4. Inside Cabinet Articulating Arm/ Full Motion Mount

This option also proves to be a popular one as many people enjoy the added flexibility of have the mount swing out without having to refinish any plywood that may show. This method allows you do do all the mounting in a area that will never been seen unless you are looking to store items behind the TV. This option still requires the use of plywood for a mounting surface only inside the cabinet. This method also requires some type of locking mechanism during transit so the TV doesn’t swivel from side to side.

Articulating Inside Cabinet Mount RV TV MOUNT

Another Method

Articulating Installed Inside Cabinet

[asa]B001GTT0VO[/asa]

5. Under Cabinet Mounting

This type of mounting can be tricky given the limited space inside most RV’s. This application tends to be better for smaller TV (less than 27″) and some under cabinet mounts even have a fold up function for those who may be tight on space.

Under Cabinet Install

Another Method (Folded up and Down)

Under Cabinet RV Mount UP Under Cabinet RV Mount Down

[asa]B003H2G7YG[/asa]

6. Outdoor Mounting

Outdoor mounting is something that can be a challenge given that most TV’s are not built to handle the elements. That’s why many people choose RV TV Mounts that allow the TV to be unattached for safe keeping when not in use. There are other applications where people have mounted swing arms inside their RV basements which is a clever way to use the TV when you want it and store it when you don’t through the use of the mounts design.

[asa]B00149RVK8[/asa]

Video Explanation of Mounting Methods Shown Here

Part 1 of 2
httpv://youtu.be/z8md_r5IX4M

Part 2 of 2
httpv://youtu.be/2_EAcI_br3I

httpv://youtu.be/ZXY-f11N8io

41 thoughts on “RV TV Mount Installation Ideas and Resources”

  1. Need help. Want to install a tilt tv bracket to the ceiling of my rv. Can someone offer some suggestions.

  2. I’m planning on mounting a 24″ led tv to my 2016 Cherokee 274DBH. The area is marked for tv mounting. What length of lag bolt do you recommend using to prevent me going through roof membrane? I see a lot of replies that say to also use 1/2″ plywood, if this area is marked, is it necessary?

  3. we have a 2010 Cedar Creek 5th wheel. The tv is in a cabinet on a up and down mount behind the fireplace. You can hide the tv behind the fireplace if your not using it and you can have full use of the top of thecabinet. Screw holes in the back of the tv but not what you mount it on

  4. We have a 2008 Keystone Montana 5th wheel 37′ with fireplace under the tv. IT is an old style tv and we would like to replace it with a flat screen. We found the screw on top holding it in place but do not know how to access whatever is holding the bottom of the tv in. Is it behind the fireplace controls? Thank you for your assistance.

  5. i have just bought an older pull behind camper and we want TO MOUNT A FLAT SCREEN T V INSIDE . the CAMPER IS A 1992 cobra industries Salem TRAVEL TRAILER 20 ‘. I know nothing about campers yet and i am sure they didn’t even make flat screens in 1992 so i am not sure where we can mount the bracket to ,and whats on the other side of the interior walls . Are campers made with studs etc . sorry for being such a newbie thanks tom

    THANKS TOM

  6. I have a 1993 Fleetwood Southwind 35 ft. motorhome. I would like to ceiling mount a TV mount in the front just behind the passenger seat. I would hang the TV only when not traveling and then remove it from the mount when on the road and the mount is moveable 90 degrees so I could secure it to the ceiling. I am just concerned if the ceiling could support the weight of a 40″ flat screen. It is about 30 lbs. I was thinking of securing a 3/4 inch piece of plywood to 2 studs, then securing the mounting brackets using toggle bolts. Or, would it work better to just secure the mounting bracket to one of the studs? This is the mount I have…. http://www.amazon.com/gp/product/B000V8VW6W?psc=1&redirect=true&ref_=oh_aui_detailpage_o01_s01

    The layout is very similar to this with the slanted ceiling in the front.
    http://www.pplmotorhomes.com/classa/1993-Southwind-By-Fleetwood-25427.htm

  7. I am trying to find the same answer that you are. Also where to place the tv in the bedroom on the wildwood 27rkss

  8. We want to mount a 32″ tv in our 2015 Puma 28dsbs travel trailer. These have the rotating wall section so the tv can be viewed from the bedroom or living area. Have you had any experience/suggestions for mounting a tv in this situation?

  9. I would like to put a larger TV in my 2007 Fourwinds Windsport. In the middle and above the front seats is the old Tube TV. I want a larger one there. What’s the best way to do it? I could use the storage behind the TV if it works out right.

  10. Though I don’t have any experience with your particular trailer. Typically that sticker is used to show you where the RV was designed for a TV to be mounted. Try using a stud finder to see if there is anything in that wall that would be rigid. We know many folks that just decided to call the manufacturer and ask what they recommend. Which might be your best bet. You can reach Keystone RV Company at (866) 425-4369.

  11. I have a Cougar Xlite, 29RES. In the bedroom, there is a sticker on the wall that says TV mount here. It does not seem to be on a stud. The wall right where the sticker is does not feel as solid as the wall does across a stud. What is the wall made of here? How thick is it? What material would I be connecting a TV mount too? And what model of mount is recommended?

  12. Hi Andrew,

    You are not alone. We wanted the same type of setup. You can have a look HERE to see all the different options. For your particular case I would have a look at this tv mount model: http://diyrv.co/1pxCgmd

    It isnt cheap but provides the functionality to move the viewing angle left to right and up and down at will. You will just have to devise a way to keep it stationary when you travel.

  13. I have a standard tv over the cab in a 2008 Winnebago Voyage. I would like to be able to lower it at will for better eye level viewing, any ideas?

  14. We have a built in spot for our tv in our 5th wheel. It will only hold a small tv. We would like to maybe hang a larger tv maybe outside of the designated spot. One that we would take down when traveling. We need help and Ideas.

    Thanks Di

  15. What is the size of the plywood behind the tv backer sticker in the 2014 wildwood 27rks in living area and how thick is the walls? Trying to install a tv mount.

  16. Seems reasonable. Though we have not done any work in your RV model it should work fine. The only concern would be connecting to an exterior wall. Have to be careful not to puncture through when fastening the plywood backing. Luckily that is a farily lightweight TV so it should not take an excessive amount of reinforcement. See if you can locate studs in the wall to secure it to. If not you can try using molly bolts to fasten the plywood. I would feel much more comfortable going with the stud route though.

    Hope that helps!

  17. Any thoughts on mounting an articulating arm tv mount to the back exterior wall of a 2012 Fourwinds 31A class C motorhome. I am looking at the back corner right next to were the slide goes out. I was going to add in a piece of plywood to give some additional support. The tv is only a 20″ that weighs 14 lbs total.

    For the mount that I am looking at there would be enough clearance between the slide and the wall to have everything fit with a few inches to spare.

    Thanks

  18. Hi Zeke,
    Tough to say without seeing a few photos. If you havent seen any obvious screws, try looking for screws that hold the wood frame in place that are accessed from the cabinets on either side of the TV cubby. We have seen a few like that in the past. We havent heard of those pieces being glued but you never really know with RV’s!

  19. I have a TV mounted in a wood cabinet above the dash. There looks like there are 4 trim pieces around the exterior of the TV. I don’t see any screws to mount the pieces. Are they glued in place? I want to start to replace the old TV but am not sure how to start without messing everything up.
    Thanks.

  20. Long story short YES. But, be sure to double check what “locking” means when deciding which to buy. There are two seperate functions for locking mounts. 1.Locking Arm Function which is what you want. 2. Locking the Arm to the Base Lock which is ti prevent theft of the TV. This of course you do not need most likely. For example this TV mount here has a locking function built in that keeps it from moving while in transit.You can clearly see it in the photo if you zoom in. If you dont want to spend the extra dollars for that functionality, you can easily create some way to restrain it using a strap with velcro or 3M Command Strips. Some folks have even used C clamps to hold it on the move. Hope that helps!

  21. We want to install a 32″ LCD TV with an articulating arm to the cabinet in our trailer. Do we need a “locking ” tv mount?

  22. Most LCD TV’s are ok to leave in a RV during winter. LCD typically do not freeze and crack. Many of the concerns usually stem from OPERATION in cold temperatures not storage. That being said you may want to check the manual for your TV to see if they have any recommended temperature ranges.
    These types of TV’s are shipped during the frigid winter in regular trucks with no insulation and arrive in your living room working great.

  23. I dont see why not. Since it is an ultralite, you may want to place the mount in a spot you know is secured to something solid such as cabinetry or an interior wall. Be aware that when you make a hole on the exterior you create a potential way to let water in.

    We prefer removable mounts for exterior applications. This is one option below. It is removable and also locking. It can be taken down as well as locked into place in windy situations or if you are moving a short distance. http://www.amazon.com/gp/product/B00149RVK8?ie=UTF8&camp=213733&creative=393185&creativeASIN=B00149RVK8&linkCode=shr&tag=3b2h5o-20&qid=1377655127&sr=8-3&keywords=outdoor+tv+mount

  24. Sylvia,

    There are just too many floor plan variations for me to sort it out. I am sorry I couldnt be of more help. I think my advice to contact Jayco is the best bet. Good Luck!

  25. I want to mount an LCD TV with built-in DVD player to the exterior of my 19 ft. Jay Feather. Would it work on that unit? What kind of mount would I need?

  26. The primary concern is puncturing through the otherside of the wall. In this case to the exterior. If spot is intended for a TV, I assume that it should not be a problem. I would probably build out the area with plywood and secure the mount to the plywood to be sure I didnt have an issue. A better option is contacting the maker of the RV and asking what is appropriate to be sure. Some newer RV’s have special kits to secure TV’s as well.

    If you want to supply your RV make and model I may be able to get better information for you.

  27. The other side of the wall is just the outside of the rv. We bought the mount and its just the basic wall mount. The tv is small as its in the bedroom, about 22″ diagonal and is very light. So probably 1″ or 1 1/2″ would do?

  28. Hi Sylvia,

    That long of a lag bolt is probably excessive and could possibly puncture through the otherside of the wall depending on the thickness of the wall in your RV and the layout. Are you using a mount you bought or did this mount come with the RV? Can you tell us what is located on the otherside of the wall?

  29. Our new rv has a place for installing a tv on the wall in the bedroom. What size lag bolts should we use? 2 1/2″ came with it

  30. Hi There!

    The need for a converter box is tied to the age of the TV not to the local channels. If you have an older TV then you may need a converter, otherwise you can connect the antenna directly to your television or audio/video switchbox.

  31. Another option is using a piece of plywood fastened with wood screws and wood glue to the area your looking to mount to. Being careful not to hit wires or other components in the wall itself. Then use traditional lag bolts to fasten the mount to the 3/4″ plywood base.

    If you want to share a little more about your RV and where your trying install it, we may be able to come up with a better solution.

    Thanks for your question!

Leave a Comment

Welcome! Please follow these guidelines:

  • Be kind and respectful.
  • Keep comments relevant to the article.
  • Avoid insults, threats, profanity, and offensive remarks.
  • Refrain from discussing gun rights, politics, or religion.
  • Do not post misleading information, personal details, or spam.

We may hide or remove comments at our discretion.