This post may contain affiliate links or mention our own products, please check out our disclosure policy.

DIY RV Kitchen Drawer Organizers for $10 – Just a Little Wood and Glue

What is about drawers that breed disorganization? We just keep loading them up with stuff until they spill over with tongs, spatulas, batteries, and every other thing under the sun. Out of desperations, we have tried the store bought drawer organizers but they never seem to fit right and waste valuable space.  So, while meandering around the internet as I often do, I stumbled onto a low cost way to get some order restored to the drawers in our RV. If you want it done right, you must always do-it-yourself. So, after borrowing this concept from, we set out to make our own RV kitchen drawer organizers.

Kevin and

Kevin and Amanda show how off how simple it is to take a few pieces of 1/4” craft wood and turn it into custom made RV kitchen drawer organizers. Yes, they fit perfectly. Once you source the materials needed, this project should only take a few hours.

We did just as they recommended and organized everything we wanted by starting with an empty drawer and carefully putting things in like doing a puzzle. Amanda used Jenga Blocks (Board Game) to act as dividers while sorting out the layout. We ended up using kabob skewers as it was all we had in the RV.

Sign up for the newsletter today!

Please enter a valid email address.

An error occurred. Please try again later.

× logo

Thank you for subscribing to the Do It Yourself RV newsletter, keep your eye on your inbox for updates.


Once you get the layout right, then you need to measure to figure out how much wood you should purchase for the RV kitchen drawer organizers. Be sure to get not only length but also width measurements to ensure your dividers are tall enough.Then head to your local hardware store and grab some hobby or craft wood that works for you. Keep in mind that depending on your drawer size this may require cutting not only for length but also for width. Be sure to have some kind of saw handy. Some home improvement stores will cut the board for you if you have your measurements ready.

Kevin and Amanda used Loctite Clear Power Grab adhesive for their dividers, but we ended up using epoxy because we already had some from a previous project. We glued only the dividers together in case we wanted to change the dividers out with ease in the future.

Our Completed RV Kitchen Drawer Organizers

Our RV Kitchen Drawer Organizers

Well what do you think? We couldn’t be happier with it. We just did the one drawer to see how it goes and may do more as the mood strikes .See a full walkthrough and additional photos of this DIY project at Kevin and

Leave a Comment

Welcome! Please follow these guidelines:

  • Be kind and respectful.
  • Keep comments relevant to the article.
  • Avoid insults, threats, profanity, and offensive remarks.
  • Refrain from discussing gun rights, politics, or religion.
  • Do not post misleading information, personal details, or spam.

We may hide or remove comments at our discretion.